AeroGCS ORANGE
  • 1. AeroGCS ORANGE User Manual
  • 2. Introduction
  • 3. Getting Started
    • 3.1 . System Requirements
    • 3.2. Getting Your AeroGCS ORANGE Software
    • 3.3. Installing and Configuring AeroGCS ORANGE Software
  • 4. Dashboard on Home Screen
  • 5. Home Menu
  • 6. General Settings
  • 7. Projects
    • 7.1 Create a New Project
    • 7.2 Setting Location
    • 7.3 Add a New Flight Plan
    • 7.4 Using Existing Flight Plan
    • 7.5 Edit a Flight Plan
      • 7.5.1 Survey plan
      • 7.5.2. Waypoint plan
      • 7.5.3. Corridor Plan
      • 7.5.4. Vertical Plan
      • 7.5.5. Circular Plan
    • 7.6 Save a Plan
    • 7.7 Export a Plan
    • 7.8 Delete a Plan/Project
      • 7.8.1. Delete a Plan
      • 7.8.2. Delete a Project
  • 8. Connecting a Drone
    • 8.1 Utilizing Serial Port
    • 8.2 Utilizing TCP
    • 8.3 Utilizing UDP
    • 8.4 Bluetooth Connection
    • 8.5 Drone Registration
  • 9. Settings (RPA Settings)
    • 9.1 Sensors
      • 9.1.1 Device Accelerometer Calibration
      • 9.1.2 Device Compass Calibration
      • 9.1.3 Level Horizon Calibration:
      • 9.1.4 Pressure Sensor Calibration
      • 9.1.5 Flow Sensor Calibration
    • 9.2 Safety Settings
      • 9.2.1 Battery Settings
      • 9.2.2 Return to Launch (RTL)
      • 9.2.3 Geofence
      • 9.2.4 Arming Checks
      • 9.2.5 Parachute
      • 9.2.6 Terrain
    • 9.3 RC Calibration
    • 9.4 Flight Modes
    • 9.5 Camera
      • 9.5.1 Camera Setting
      • 9.5.2 Gimbal Setting
    • 9.6 Joy Stick
  • 10. Mission Planning
    • 10.1 Mission Type
    • 10.2 Vehicle Type
    • 10.3 Flight Type
    • 10.4 Flight Plan
    • 10.5 Survey Planning
      • 10.5.1. Camera Details:-
      • 10.5.2. Survey Details:-
      • 10.5.3. Survey Statistics
      • 10.5.4. Fence Boundary
    • 10.6 Waypoint Planning
      • 10.6.1. Waypoint Details
      • 10.6.2. Fence boundary:
    • 10.7 Read From Device
    • 10.8 Corridor Planning
      • 10.8.1. Camera Details:
      • 10.8.2. Corridor Details:
      • 10.8.3. Corridor Survey Statistics
      • 10.8.4. Fence Boundary
    • 10.9 Vertical Planning
      • 10.9.1 Vertical details
      • 10.9.2 Fence Boundary
    • 10.10 Circular Planning
      • 10.10.1 Circular Details
      • 10.10.2 Circular Statistics
      • 10.10.3. Fence Boundary
    • 10.11 Import KML
  • 11. Flight View
    • 11.1 Flight Controls
    • 11.2 Status details and settings option
    • 11.3 Flight Details
    • 11.4 Live Camera Feed and Camera Control
    • 11.5 Plan View
    • 11.6 Arm and Disarm Navigation Bar
  • 12. Flight logs (Notifications)
    • 12.1 Logs from Home Menu
    • 12.2 From Selected Plan
  • 13. Data Verification Tool
    • 13.1 Geo Tagging
    • 13.2 GCP (Ground Control Point)
    • 13.3 Upload Data
    • 13.4 Image settings
    • 13.4 Image Verification
    • 13.5 Missing and Overlap
    • 13.6 Image Quality
  • 14. Teams
  • 15. VTOL Support
    • 15.1 Survey Plan For VTOL
      • 15.1.1 Camera Details
      • 15.1.2 Survey Details
      • 15.1.3 Survey Statistics
      • 15.1.3 Fence Boundary
    • 15.2 VTOL Flight Mode
Powered by GitBook
On this page
  1. 10. Mission Planning
  2. 10.5 Survey Planning

10.5.4. Fence Boundary

Previous10.5.3. Survey StatisticsNext10.6 Waypoint Planning

Last updated 1 year ago

If the user chooses " Fence Boundary," the following screen will be displayed on your device.

On this screen, the user will be able to increase or decrease the fence boundary of the survey plan with the help of a slider or the "+" and "-" buttons. The fence boundary is drawn in green color in a square shape around the survey plan.

Users can adjust the survey plan area by dragging the red-colored fence waypoints with the number displayed on the inner fence boundary, which is highlighted in yellow. As shown in the following screen.

Users can add new fence boundary waypoints on the inner fence boundary by clicking on the red-colored points without numbers.

After completing the modification and setting values to parameters in all the above-mentioned sections, the user must click the "Apply" button to apply the new values to the plan. The updated survey plan will be displayed on the user's device screen, as shown in the following screen.

After applying the new settings to a survey plan, the user must save it by clicking the "Save" button. This will prompt the user to save by entering the project name and plan name, as shown in the following screen.

Click on the "Save" button after entering the project name and plan name. This will save the survey plan in the project and ask the user, "Plan is saved, do you want to upload plan to the device?" as shown in the following screen.

Click on "Yes" if the user wants to upload the plan to the device. It will upload the plan to the device and will ask the user, "Flight plan uploaded, proceeding for flight" as shown in the following screen.

Note: At this stage, if the drone/vehicle is not connected to AeroGCS ORANGE, the system will prompt you to establish a connection. Follow the on-screen instructions to connect with the device/drone. For more details, please refer to the "Connecting a Drone" section in this manual.

After clicking the "OK" button, it will proceed with the flight, and the following fly view will be displayed on your screen.

Now, the user is ready to fly the vehicle/drone by pressing the "Fly" button.

After connecting the drone, navigate to the project menu by clicking on the and selecting the desired project and plan. The saved plan view will be displayed. Click on the "Upload" button to transfer the plan to the device/drone and proceed with the mission.

fence boundary
adjust fence boundary
updated survey plan
survey plan save
Survey Plan Save
survey flight plan uploaded
Survey Fly View