AeroGCS ORANGE
  • 1. AeroGCS ORANGE User Manual
  • 2. Introduction
  • 3. Getting Started
    • 3.1 . System Requirements
    • 3.2. Getting Your AeroGCS ORANGE Software
    • 3.3. Installing and Configuring AeroGCS ORANGE Software
  • 4. Dashboard on Home Screen
  • 5. Home Menu
  • 6. General Settings
  • 7. Projects
    • 7.1 Create a New Project
    • 7.2 Setting Location
    • 7.3 Add a New Flight Plan
    • 7.4 Using Existing Flight Plan
    • 7.5 Edit a Flight Plan
      • 7.5.1 Survey plan
      • 7.5.2. Waypoint plan
      • 7.5.3. Corridor Plan
      • 7.5.4. Vertical Plan
      • 7.5.5. Circular Plan
    • 7.6 Save a Plan
    • 7.7 Export a Plan
    • 7.8 Delete a Plan/Project
      • 7.8.1. Delete a Plan
      • 7.8.2. Delete a Project
  • 8. Connecting a Drone
    • 8.1 Utilizing Serial Port
    • 8.2 Utilizing TCP
    • 8.3 Utilizing UDP
    • 8.4 Bluetooth Connection
    • 8.5 Drone Registration
  • 9. Settings (RPA Settings)
    • 9.1 Sensors
      • 9.1.1 Device Accelerometer Calibration
      • 9.1.2 Device Compass Calibration
      • 9.1.3 Level Horizon Calibration:
      • 9.1.4 Pressure Sensor Calibration
      • 9.1.5 Flow Sensor Calibration
    • 9.2 Safety Settings
      • 9.2.1 Battery Settings
      • 9.2.2 Return to Launch (RTL)
      • 9.2.3 Geofence
      • 9.2.4 Arming Checks
      • 9.2.5 Parachute
      • 9.2.6 Terrain
    • 9.3 RC Calibration
    • 9.4 Flight Modes
    • 9.5 Camera
      • 9.5.1 Camera Setting
      • 9.5.2 Gimbal Setting
    • 9.6 Joy Stick
  • 10. Mission Planning
    • 10.1 Mission Type
    • 10.2 Vehicle Type
    • 10.3 Flight Type
    • 10.4 Flight Plan
    • 10.5 Survey Planning
      • 10.5.1. Camera Details:-
      • 10.5.2. Survey Details:-
      • 10.5.3. Survey Statistics
      • 10.5.4. Fence Boundary
    • 10.6 Waypoint Planning
      • 10.6.1. Waypoint Details
      • 10.6.2. Fence boundary:
    • 10.7 Read From Device
    • 10.8 Corridor Planning
      • 10.8.1. Camera Details:
      • 10.8.2. Corridor Details:
      • 10.8.3. Corridor Survey Statistics
      • 10.8.4. Fence Boundary
    • 10.9 Vertical Planning
      • 10.9.1 Vertical details
      • 10.9.2 Fence Boundary
    • 10.10 Circular Planning
      • 10.10.1 Circular Details
      • 10.10.2 Circular Statistics
      • 10.10.3. Fence Boundary
    • 10.11 Import KML
  • 11. Flight View
    • 11.1 Flight Controls
    • 11.2 Status details and settings option
    • 11.3 Flight Details
    • 11.4 Live Camera Feed and Camera Control
    • 11.5 Plan View
    • 11.6 Arm and Disarm Navigation Bar
  • 12. Flight logs (Notifications)
    • 12.1 Logs from Home Menu
    • 12.2 From Selected Plan
  • 13. Data Verification Tool
    • 13.1 Geo Tagging
    • 13.2 GCP (Ground Control Point)
    • 13.3 Upload Data
    • 13.4 Image settings
    • 13.4 Image Verification
    • 13.5 Missing and Overlap
    • 13.6 Image Quality
  • 14. Teams
  • 15. VTOL Support
    • 15.1 Survey Plan For VTOL
      • 15.1.1 Camera Details
      • 15.1.2 Survey Details
      • 15.1.3 Survey Statistics
      • 15.1.3 Fence Boundary
    • 15.2 VTOL Flight Mode
Powered by GitBook
On this page
  1. 11. Flight View

11.4 Live Camera Feed and Camera Control

Previous11.3 Flight DetailsNext11.5 Plan View

Last updated 1 year ago

AeroGCS ORANGE enables users to view the live camera feed while flying using camera controls located on the flight view at the top-right corner of the screen, as illustrated in the Flight view figure. On the flight view, the camera feed and camera controls will appear as shown in the following figure.

If the camera feed and camera controls are not visible on the flight, users can view them by clicking on the camera button at the top right corner of the flight view.

Users can view live video on the flight view screen during the flight. The controls are as described in the following:

Note: The user can change the location of the Live Camera Feed control to a new location on the screen according to their convenience by selecting and dragging it to the desired position.

Recording :- Users can record the live video of the flight by clicking on this Recording button. Recorded videos are stored locally under the VIDEO folder.

Capture :- Users can capture an image during the flight by clicking on the Capture button. Captured images will be stored locally under the PHOTO folder.

Trigger :- Users can trigger the camera to capture an image during the flight by clicking on the Trigger Button. Captured images will be stored in the camera storage.

LiveStreaming :- Users can live stream the ongoing flight video to AeroGCS Enterprise. Additionally, users can track the current flight on AeroGCS Enterprise if they have an AeroGCS Enterprise account.

Gimbal : The user can expand gimbal-related settings by clicking on the Gimbal Button. This allows the user to control the camera gimbal either by RC or GCS using the toggle button (by default set to RC). If the user selects GCS for gimbal settings, they can set pitch and yaw with the help of the available slider controls.

Close : The user can close the live camera feed control by clicking on the Close button.

Video Screen Resize : The user can resize the video screen by clicking on the Video Screen Resize Button. When the video screen is in full-screen mode, the flight view screen will be displayed in a smaller size at the bottom left of the screen. The user can go back to the original flight view full screen by clicking this button.

Camera Feed and Controls