AeroGCS ORANGE
  • 1. AeroGCS ORANGE User Manual
  • 2. Introduction
  • 3. Getting Started
    • 3.1 . System Requirements
    • 3.2. Getting Your AeroGCS ORANGE Software
    • 3.3. Installing and Configuring AeroGCS ORANGE Software
  • 4. Dashboard on Home Screen
  • 5. Home Menu
  • 6. General Settings
  • 7. Projects
    • 7.1 Create a New Project
    • 7.2 Setting Location
    • 7.3 Add a New Flight Plan
    • 7.4 Using Existing Flight Plan
    • 7.5 Edit a Flight Plan
      • 7.5.1 Survey plan
      • 7.5.2. Waypoint plan
      • 7.5.3. Corridor Plan
      • 7.5.4. Vertical Plan
      • 7.5.5. Circular Plan
    • 7.6 Save a Plan
    • 7.7 Export a Plan
    • 7.8 Delete a Plan/Project
      • 7.8.1. Delete a Plan
      • 7.8.2. Delete a Project
  • 8. Connecting a Drone
    • 8.1 Utilizing Serial Port
    • 8.2 Utilizing TCP
    • 8.3 Utilizing UDP
    • 8.4 Bluetooth Connection
    • 8.5 Drone Registration
  • 9. Settings (RPA Settings)
    • 9.1 Sensors
      • 9.1.1 Device Accelerometer Calibration
      • 9.1.2 Device Compass Calibration
      • 9.1.3 Level Horizon Calibration:
      • 9.1.4 Pressure Sensor Calibration
      • 9.1.5 Flow Sensor Calibration
    • 9.2 Safety Settings
      • 9.2.1 Battery Settings
      • 9.2.2 Return to Launch (RTL)
      • 9.2.3 Geofence
      • 9.2.4 Arming Checks
      • 9.2.5 Parachute
      • 9.2.6 Terrain
    • 9.3 RC Calibration
    • 9.4 Flight Modes
    • 9.5 Camera
      • 9.5.1 Camera Setting
      • 9.5.2 Gimbal Setting
    • 9.6 Joy Stick
  • 10. Mission Planning
    • 10.1 Mission Type
    • 10.2 Vehicle Type
    • 10.3 Flight Type
    • 10.4 Flight Plan
    • 10.5 Survey Planning
      • 10.5.1. Camera Details:-
      • 10.5.2. Survey Details:-
      • 10.5.3. Survey Statistics
      • 10.5.4. Fence Boundary
    • 10.6 Waypoint Planning
      • 10.6.1. Waypoint Details
      • 10.6.2. Fence boundary:
    • 10.7 Read From Device
    • 10.8 Corridor Planning
      • 10.8.1. Camera Details:
      • 10.8.2. Corridor Details:
      • 10.8.3. Corridor Survey Statistics
      • 10.8.4. Fence Boundary
    • 10.9 Vertical Planning
      • 10.9.1 Vertical details
      • 10.9.2 Fence Boundary
    • 10.10 Circular Planning
      • 10.10.1 Circular Details
      • 10.10.2 Circular Statistics
      • 10.10.3. Fence Boundary
    • 10.11 Import KML
  • 11. Flight View
    • 11.1 Flight Controls
    • 11.2 Status details and settings option
    • 11.3 Flight Details
    • 11.4 Live Camera Feed and Camera Control
    • 11.5 Plan View
    • 11.6 Arm and Disarm Navigation Bar
  • 12. Flight logs (Notifications)
    • 12.1 Logs from Home Menu
    • 12.2 From Selected Plan
  • 13. Data Verification Tool
    • 13.1 Geo Tagging
    • 13.2 GCP (Ground Control Point)
    • 13.3 Upload Data
    • 13.4 Image settings
    • 13.4 Image Verification
    • 13.5 Missing and Overlap
    • 13.6 Image Quality
  • 14. Teams
  • 15. VTOL Support
    • 15.1 Survey Plan For VTOL
      • 15.1.1 Camera Details
      • 15.1.2 Survey Details
      • 15.1.3 Survey Statistics
      • 15.1.3 Fence Boundary
    • 15.2 VTOL Flight Mode
Powered by GitBook
On this page
  1. 7. Projects

7.6 Save a Plan

Once all the necessary parameters are appropriately configured, it's important to proceed by saving the changes. Clicking on the 'Save' button ensures that all modifications are stored and that these settings are specific to the particular plan and project. The saved parameters will remain unchanged unless intentionally modified. This flexibility allows for the reuse of the same plan for various purposes without the need to create a new plan and project every time. If you proceed without saving the new parameters, the system will consider the previous or default settings.

Previous7.5.5. Circular PlanNext7.7 Export a Plan

Last updated 3 months ago