> For the complete documentation index, see [llms.txt](https://aerogcs-orange-docs.aeromegh.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://aerogcs-orange-docs.aeromegh.com/9.-settings-rpa-settings/9.2-safety-settings/9.2.5-parachute.md).

# 9.2.5 Parachute

#### 1.1.1         Parachute:

This screen displays the parachute settings as configured by the OEM. Users can view these settings but cannot adjust them.As shown in following screen

<figure><img src="/files/PoOvGL3Hxqk6FOw6XvjB" alt=""><figcaption><p>Parachute</p></figcaption></figure>

The following parachute settings are displayed:

* **Parachute Enabled**: Whether the parachute system is enabled or disabled (as set by OEM)
* **Type**: The type of parachute system (as set by OEM)
* **Servo On**: Whether the parachute servo is on or off (as set by OEM)
* **Servo Off State**: The state of the parachute servo when it's off (as set by OEM)
* **Minimum Deployment Altitude**: The minimum altitude at which the parachute will deploy (as set by OEM)
* **Parachute Delay**: The delay between when a critical event occurs and when the parachute deploys (as set by OEM)
* **Critical Sink Rate**: The sink rate at which the parachute will automatically deploy (as set by OEM)

&#x20;