AeroGCS ORANGE
  • 1. AeroGCS ORANGE User Manual
  • 2. Introduction
  • 3. Getting Started
    • 3.1 . System Requirements
    • 3.2. Getting Your AeroGCS ORANGE Software
    • 3.3. Installing and Configuring AeroGCS ORANGE Software
  • 4. Dashboard on Home Screen
  • 5. Home Menu
  • 6. General Settings
  • 7. Projects
    • 7.1 Create a New Project
    • 7.2 Setting Location
    • 7.3 Add a New Flight Plan
    • 7.4 Using Existing Flight Plan
    • 7.5 Edit a Flight Plan
      • 7.5.1 Survey plan
      • 7.5.2. Waypoint plan
      • 7.5.3. Corridor Plan
      • 7.5.4. Vertical Plan
      • 7.5.5. Circular Plan
    • 7.6 Save a Plan
    • 7.7 Export a Plan
    • 7.8 Delete a Plan/Project
      • 7.8.1. Delete a Plan
      • 7.8.2. Delete a Project
  • 8. Connecting a Drone
    • 8.1 Utilizing Serial Port
    • 8.2 Utilizing TCP
    • 8.3 Utilizing UDP
    • 8.4 Bluetooth Connection
    • 8.5 Drone Registration
  • 9. Settings (RPA Settings)
    • 9.1 Sensors
      • 9.1.1 Device Accelerometer Calibration
      • 9.1.2 Device Compass Calibration
      • 9.1.3 Level Horizon Calibration:
      • 9.1.4 Pressure Sensor Calibration
      • 9.1.5 Flow Sensor Calibration
    • 9.2 Safety Settings
      • 9.2.1 Battery Settings
      • 9.2.2 Return to Launch (RTL)
      • 9.2.3 Geofence
      • 9.2.4 Arming Checks
      • 9.2.5 Parachute
      • 9.2.6 Terrain
    • 9.3 RC Calibration
    • 9.4 Flight Modes
    • 9.5 Camera
      • 9.5.1 Camera Setting
      • 9.5.2 Gimbal Setting
    • 9.6 Joy Stick
  • 10. Mission Planning
    • 10.1 Mission Type
    • 10.2 Vehicle Type
    • 10.3 Flight Type
    • 10.4 Flight Plan
    • 10.5 Survey Planning
      • 10.5.1. Camera Details:-
      • 10.5.2. Survey Details:-
      • 10.5.3. Survey Statistics
      • 10.5.4. Fence Boundary
    • 10.6 Waypoint Planning
      • 10.6.1. Waypoint Details
      • 10.6.2. Fence boundary:
    • 10.7 Read From Device
    • 10.8 Corridor Planning
      • 10.8.1. Camera Details:
      • 10.8.2. Corridor Details:
      • 10.8.3. Corridor Survey Statistics
      • 10.8.4. Fence Boundary
    • 10.9 Vertical Planning
      • 10.9.1 Vertical details
      • 10.9.2 Fence Boundary
    • 10.10 Circular Planning
      • 10.10.1 Circular Details
      • 10.10.2 Circular Statistics
      • 10.10.3. Fence Boundary
    • 10.11 Import KML
  • 11. Flight View
    • 11.1 Flight Controls
    • 11.2 Status details and settings option
    • 11.3 Flight Details
    • 11.4 Live Camera Feed and Camera Control
    • 11.5 Plan View
    • 11.6 Arm and Disarm Navigation Bar
  • 12. Flight logs (Notifications)
    • 12.1 Logs from Home Menu
    • 12.2 From Selected Plan
  • 13. Data Verification Tool
    • 13.1 Geo Tagging
    • 13.2 GCP (Ground Control Point)
    • 13.3 Upload Data
    • 13.4 Image settings
    • 13.4 Image Verification
    • 13.5 Missing and Overlap
    • 13.6 Image Quality
  • 14. Teams
  • 15. VTOL Support
    • 15.1 Survey Plan For VTOL
      • 15.1.1 Camera Details
      • 15.1.2 Survey Details
      • 15.1.3 Survey Statistics
      • 15.1.3 Fence Boundary
    • 15.2 VTOL Flight Mode
Powered by GitBook
On this page
  1. 11. Flight View

11.5 Plan View

Previous11.4 Live Camera Feed and Camera ControlNext11.6 Arm and Disarm Navigation Bar

Last updated 1 year ago

At the center of the flight view screen, the user will see the ongoing flight plan view, where they can observe the live tracking of the moving drone along the planned path from the drone's home location to the first waypoint and then to the end waypoint. Additionally, on the planned path, the user will notice a camera icon image at the points where actual images are captured by the camera during the flight.

Plan View