> For the complete documentation index, see [llms.txt](https://aerogcs-orange-docs.aeromegh.com/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://aerogcs-orange-docs.aeromegh.com/8.-connecting-a-drone/8.4-bluetooth-connection.md).

# 8.4	 Bluetooth Connection

For a Bluetooth connection, access this screen.

<figure><img src="/files/Nr14A8l1bGM1BIMZeIRK" alt=""><figcaption><p>Bluetooth Scan</p></figcaption></figure>

Scan for devices by clicking "**Scan**." Choose your device from the list, and grant location permission if needed.

<figure><img src="/files/gfkM9PgBRDjlsVcAuT8i" alt=""><figcaption><p>Select Bluetooth Device</p></figcaption></figure>

You can use the “**Stop**” Button to stop Bluetooth scans for devices.

To connect, click "**Connect**." Upon success, a notification will confirm " **Communication Link Established**," and the top bar of the screen will change to a vibrant green color, as seen below.

<figure><img src="/files/fLUdXePE9S8Co6MttGGf" alt=""><figcaption><p>Communication link established</p></figcaption></figure>

Click on the "Ok" button. you will see the following screen.

<figure><img src="/files/nbNdOEl2CWmiHYcwbQBF" alt=""><figcaption><p>Drone Connected</p></figcaption></figure>

User Must select the right communication protocol based on the app and device range.