9.5.1 Camera Setting
Last updated
Last updated
In AeroGCS ORANGE, the screen below exhibits a segment dedicated to configuring camera settings.
Upon selecting the Camera option in settings, the system will automatically identify and list the detected camera under the Camera section. Users can then enter the RTSP camera stream URL, and there is an additional option to activate the stream by toggling the designated button.
Once you've finished making changes, click the "Update" button to apply and send the parameters to the device.
In this section, you can configure camera-related parameters as follows:
Camera Relay: Choose between "Low" or "High" for the camera relay setting.
Camera Servo on Set the Camera Servo On value within the range of PWM from 1000 to 2000.
Camera Servo Off: Specify the Camera Servo Off value within the PWM range of 1000 to 2000.
Camera Trigger Type: Select the Camera Trigger Type from the drop-down menu, with options "Servo" or "Relay."
Camera Trigger Distance: Define the distance at which the camera will automatically trigger, ranging from 0 to 1000 meters.
Camera Trigger Duration: Set the camera trigger duration to a desired value in deciseconds, with a range from 0 to 50.
Camera Relay Pin: Configure the Camera relay pin according to your requirements, with values ranging from 0 to 50.
